How To Make Flight Maps

We’re constantly being asked how we make the maps that show our crazy itineraries. Obviously they’re helpful for blog posts, but I know other people like them for showing to friends and family, adding to a photo album of a trip, etc., and as I was taking some screenshots for an upcoming post it occurred to me that we’ve never done a tutorial.

There are probably other tools and sites out there, but our preference is Great Circle Mapper. The interface is simple, so you could go there right now and not even read this post, but there are some advanced tricks that I thought might be fun to go over.

Know your airport codes

In order to use the map tools, you’ll need to know the airport codes you’re planning on flying through. You can technically search for airport codes based on city names, but if you try and enter a routing with just city names you’ll get an error.

make-flight-maps-001

It’s much better to instead enter the IATA code of a given airport. You can enter specific airports (like LHR for London Heathrow), or city codes (LON for all the London airports). To show a routing, connect the airport codes with a dash.

So if you wanted to plot the line between Los Angeles and London, you’d enter:

LAX-LON

Which would generate:

make-flight-maps-002

This goes beyond city pairs. If you wanted to show a route from Los Angeles to Dubai via London, you’d enter:

LAX-LON-DXB

Which would generate:

make-flight-maps-005

In addition to stringing together flight paths, you can also show multiple routes by separating them with a comma. To show a Miami to Madrid flight on the same screen as the flight to Dubai, you’d enter:

LAX-LON-DXB, MIA-MAD

Which would generate:

make-flight-maps-006

Basically, you’re going to be connecting everything with a dash, or separating it with a comma. This will be helpful info going forward.

Styling the map

While the default maps are a great start, you can also customize them quite a bit. Let’s use the crazy trip Ben and I are taking as an example of when you might want to tweak the map a bit more. Our routing is:

LAX-SVO-BEG-JFK-GYD-IEV-JFK-DCA

As one does, of course.

Because the Los Angeles to Moscow flight is a polar route, the map defaults to showing that projection:

make-flight-maps-009

But if you scroll down, and click on the “Map Conf” tab, you can choose a different angle for your map.

make-flight-maps-011

The rectangular projection is a bit easier to look at, in this case.

make-flight-maps-012

You can also change the background of the map. There’s a lighter option, which can be easier to see the lines on:

make-flight-maps-013

Or the “Blue Marble” option, which shows some terrain:

make-flight-maps-014

You can also have quite a bit of fun with the fonts, line thickness, pin shape, etc. At the bottom of the page there’s a tab for “Markers” which lets you control all of that.

make-flight-maps-015

There’s also drop-down menu for “Label” which allows you to choose to display the city name (or several other options) instead of the airport code.

make-flight-maps-016

Much better, right?

Changing the colors

This is advanced Great Circle Mapper, but you don’t have to stick with the red dots and lines. Let’s say I wanted to show the breakdown of our current trip, for example, since it involves several sets of tickets.

I can change the color of each line (or series of lines) by adding “color:[color name]” in front of a string, separating it from the next airport code with a comma.

So, if I wanted to emphasize the SkyMiles award we used to get to Belgrade, I might leave that red, and change the rest of the flights to blue. In this case, we’d enter:

LAX-SVO-BEG, color:blue, BEG-JFK-GYD-IEV-JFK-DCA

And get:

make-flight-maps-018

Or if I wanted to go all out and show each set of tickets in a different color I could do that too:

make-flight-maps-017

The code for this is:

LAX-SVO-BEG, color:blue, BEG-JFK, color:purple, JFK-GYD, color:orange,IEV-JFK, color:green, JFK-DCA

Keep in mind that if you want to change the color at a connecting point you’ll need to repeat that city in your string. So something like this:

make-flight-maps-020

Would be written as:

LAX-LON, color:purple, LON-JFK

You also don’t have to stick with the stock colors. Any color name can be replaced with a hex code. So if I wanted to choose my own particular shades of purple and red, I could enter:

color:#cc0000,LAX-LON, color:#df80ff, LON-JFK

And get:

make-flight-maps-021

Much much more

This is just the “pretty” side of Great Circle Mapper. The site owner, Karl L. Swartz, has built a fantastic tool that does much more than show flight paths.

You can also calculate approximate distances of flight segments, which are generally pretty close to the calculations used by the mileage programs. So if you were deciding whether to connect in Chicago or Dallas on a San Diego > New York trip you’d enter:

SAN-ORD-JFK, SAN-DFW-JFK

In addition to the map, the site shows you the flown distance of each flight, and of the routing as a whole.

make-flight-maps-007 make-flight-maps-008

You can map ranges, look up ETOPS, see the latitude and longitude of an airport, etc. It can be quite the rabbit hole, and he puts up fun featured maps from time to time as well.

So nothing earth-shattering, but hopefully helpful to some of you!

Do you have a flight mapping tool you’d recommend?

Maps generated by the Great Circle Mapper – copyright © Karl L. Swartz

Comments

  1. I love GC Mapper – use it all the time!
    Tiffany is awesome. Clearly it shows here, and in essentially every post she does.

  2. @Tiffany – thank you very much for this post!

    One question – generally speaking, how close are the Great Circle Mapper mileage estimates to the number of miles you’d actually earn by taking the given flight (assuming you earn 100% miles flown)?

  3. I’m planning a surprise trip around the world and this will be a great thing to put under the Christmas tree! Thanks for the great detailed post!

  4. I’ve used Great Circle Mapper before but never realized just how customizable it is – thank you, Tiffany!

    @Michael C, if you’re looking for a tool to help calculate mileage, I recommend Webflyer’s Mileage Calculator as it even lets you add in different types of bonuses – class of service, elite, etc.: http://www.webflyer.com/travel/mileage_calculator/

  5. Thank you @tiffany. What I meant is how to show every states and countries showing on map not just waypoints. Thanks

  6. Great post!!! Is there a way to show every itinerary as a separate segment?For instance, i have 3 flights – day 1 has JFK-MIA, day 3 has MIA-UIO, and day 8 has UIO-MIA-JFK.

    Even if I use colors, it does not really show UIO-MIA-JFK differently than JFK-MIA and MIA-UIO.

  7. Another great use is that it shows how “out of the way” a given routing is. For example, if you enter jfk-hkg,jfk-cdg-bkk-hkg, it will tell you that the later routing is 30.8% longer than a direct flight. This can be useful for programs like Aeroplan where you can piece together a route over the phone, as long as it doesn’t go over the maximum permitted mileage. This gives you a good idea as to whether or not your routing will be legal.

  8. Great post ! One thing I would like to see is the ability to show the order of the flights, e.g. by showing the direction of travel like adding an arrow in the flight paths. Don’t think this is possible. Let’s say the flight order is SAN-ORD-JFK-DFW-SAN, the map won’t really tell the difference between that and SAN-DFW-JFK-ORD-SAN.

    The closest I could get is to add a number label along the path, to show the order of the flights. But it’s a hassle to look up the lat/lon of where’s best to place the label. For example,

    SAN-ORD-JFK-DFW-SAN,COLOR:PURPLE,”%T1″+@38.618542n102.054410w,”%T2″+@41.582257n80.510575w,”%T3″+@36.212521n89.226422w,”%T4″+@33.421309n106.278692w

    would get you a map of

    http://www.gcmap.com/mapui?P=SAN-ORD-JFK-DFW-SAN,COLOR:PURPLE,%22%25T1%22%2b%4038.618542n102.054410w,%22%25T2%22%2b%4041.582257n80.510575w,%22%25T3%22%2b%4037.212521n86.226422w,%22%25T4%22%2b%4033.321309n106.278692w

    which can better tell the order of the flights. Anyone has better ideas ?

Leave a Reply

Your email address will not be published. Required fields are marked *